The Quad “H” Bridge Module is a member of Intellitec’s Multiplex Control family.
It works in combination with the PMC CPU and other standard, semi-custom, or custom I/O modules.
The 916-120 provides power fusing, switching, and distribution all in one module.
It would typically be used to operate reversible motor loads.
This module has eight, 10 amp SPDT relays connected in four “H” bridge configurations.
When a channel is activated, it connects one end of the load to the Battery, while the other end is connected to Ground.
Each of the four ”H” bridges is fed from a fuse position that can be filled with a fuse, or circuit breaker.
The total module current should not exceed 20 Amps.
The Quad “H” Bridge Module includes 9 diagnostic LED’s.
One indicates the loss of the communication signal and the others indicate the activation of the individual outputs.
All of the output harnesses are connected with AMP Mate-NLok connectors to reduce installation time and errors.
The approximate module dimensions are: 5.8” X5.0”X1.45” (147mm X127mm X36mm).
The module should be installed in a protected environment, inside the vehicle.
